Tight tolerances, superior performance

Precision Strip

Outokumpu's cold-rolled thin strips are meticulously crafted and customized to meet the specific needs of different industries. 

Locations

Available grades and dimensions

METRIC DIMENSIONS
Surface finish Thickness (mm) Width (mm)
2R – Cold-rolled, bright-annealed 0.05–1.50 3–649
2H – Work hardened 0.05–1.50 3–630

 

IMPERIAL DIMENSIONS
Surface finish Thickness (in) Width (in)
2R – Cold-rolled, bright-annealed 0.002–0.06 0.118–25.551
2H – Work hardened 0.002–0.06 0.118–24.803

 

The availability of specific surface finish and dimension combination depends on the steel grade.

 

Delivery forms

Coils with inside diameter of 200, 300, 400 and 500 mm depending on strip width and thickness. Other coil inside diameters on request. Coil weight up to 10 kg/mm strip width. Can also be supplied on spools on request.

 

Tolerances

Width and thickness tolerances to EN 10258 (formerly DIN 59381). Closer tolerances can be agreed on.

 

Mechanical properties

  • EN 10088 Stainless steel strip (general)
  • EN 10151 Stainless steel strip for springs (any strength within the normal range is possible)

 

Check Stainless Steel Finder to view different stainless steel grades, thickness and width ranges, and available finishes by product form based on EN and ASTM standards. You’ll also find information about stainless steel grades’ corrosion resistance, mechanical strength, elongation, and other properties.

Moda 430/4016 stainless steel

Moda 430/4016 is a classic 16 % chromium ferritic stainless steel used in mildly corrosive environments.

Please remove item from comparison before you can add another one

  • EN: 1.4016
  • ASTM type: 430
  • ASTM UNS: S43000
  • Microstructure : Ferritic
Typical applications
  • Kitchen equipment
  • Household appliances
  • Sinks
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 16.2
  • Ni: -
  • Mo: -
  • N: -
  • Others : -

Moda 439/4510 stainless steel

A titanium-stabilized 17% chromium ferritic steel with improved corrosion resistance, formability, and weldability compared to Moda 430/4016.

Please remove item from comparison before you can add another one

  • EN: 1.4510
  • ASTM type: 439
  • ASTM UNS: S43035
  • Microstructure: Ferritic
Typical applications
  • Automotive exhaust systems
  • Sugar industry equipment
  • Household appliances
Chemical composition
  • C: 0.02
  • Cr: 17.1
  • Ni: -
  • Mo: -
  • N: -
  • Others: Ti

Moda 409/4512 stainless steel

Moda 409/4512 is a weldable ferritic stainless steel with good oxidation resistance in dry air. It is also available as low-carbon Moda 409L.

Please remove item from comparison before you can add another one

  • EN: 1.4512
  • ASTM type: 409
  • ASTM UNS: -
  • Microstructure: Ferritic
Typical applications
  • Automotive applications
  • Industrial exhaust systems
Chemical composition
  • C: 0.02
  • Cr: 11.5
  • Ni: 0,2
  • Mo: -
  • N: -
  • Others: Ti

Moda 430Ti/4520 stainless steel

Moda 430Ti/4520 is an alternative to Moda 430/4016 with better formability and weldability for stamping, drawability applications, and complex shapes.

Please remove item from comparison before you can add another one

  • EN: 1.4520
  • ASTM type: 430Ti
  • ASTM UNS: -
  • Microstructure : Ferritic
Typical applications
  • Counter tops
  • Flue induction connectors
  • Automotive applications
Chemical composition
  • C: 0.02
  • Cr: 16.2
  • Ni: -
  • Mo: -
  • N: -
  • Others: Ti

Core 434/4113

A molybdenum-alloyed ferritic stainless steel that offers improved corrosion resistance. This grade is available from Outokumpu Americas.

Please remove item from comparison before you can add another one

  • EN: 1.4113
  • ASTM type: 434
  • ASTM UNS: S43400
  • Microstructure: Ferritic
Typical applications
  • Automotive trim and fittings
Typical chemical composition, % by mass
  • C: 0.04
  • Cr: 16.5
  • Ni: -
  • Mo: 1.0
  • N: -
  • Others: -

Core 304/4301

Core 304/4301 is a classic 18% chromium, 8% nickel austenitic stainless steel. It’s an all-purpose product with good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Core 304/4301 can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4301
  • ASTM type: 304
  • ASTM UNS: S30400
  • Microstructure: Austenitic
Typical applications
  • Household appliances and consumer goods
  • Kitchen equipment
  • Indoor and outdoor cladding, handrails and window frames
  • Food and beverage industry equipment
  • Storage tanks
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.04
  • Cr: 18.1
  • Ni: 8.1
  • Mo: -
  • N: -
  • Others: -

Core 305/4303

A high-nickel alternative to Core 304/4301 with reduced strain hardening and excellent cold-forming properties. Ideal for parts that require high degree of deformation. 

Please remove item from comparison before you can add another one

  • EN: 1.4303
  • ASTM type: 305
  • ASTM UNS: S30500
  • Microstructure: Austenitic
Typical applications
  • Industrial parts with complex shapes
  • Sinks and other deep-drawn products
  • Complex stamping processes
  • Re-rollers producing very thin-gauge coils
Typical chemical composition, % by mass
  • C: 0.04
  • Cr: 17.7
  • Ni: 12.5
  • Mo: -
  • N: -
  • Others: -

Core 304L/4306

A higher nickel alternative to Core 304L/4307 with improved formability and deep drawability.

Please remove item from comparison before you can add another one

  • EN: 1.4306
  • ASTM type: 304L
  • ASTM UNS: S30403
  • Microstructure: Austenitic
Typical applications
  • Chemical and pharmaceutical plant equipment (mild to medium corrosive environments)
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 18.2
  • Ni: 10.1
  • Mo: -
  • N: -
  • Others: -

Core 304L/4307

Core 304L/4307 is a low-carbon alternative to Core 304/4301. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion. Core 304L/4307 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4307
  • ASTM type: 304L
  • ASTM UNS: S30403
  • Microstructure: Austenitic
Typical applications
  • Food and beverage industry equipment
  • Chemical and pharmaceutical industry equipment (mild to medium corrosive environments)
  • Heat exchangers
  • Storage tanks
  • Tank containers
  • Pipes and tubes
  • Flanges and valves
Typical chemical composition,% by mass
  • C: 0.02
  • Cr: 18.1
  • Ni: 8.1
  • Mo: -
  • N: -
  • Others: -

Core 301/4310

A lower chromium and nickel alternative to Core 304/4301 with high work hardening capacity, this is a good choice for applications subjected to high mechanical loading

Please remove item from comparison before you can add another one

  • EN: 1.4310
  • ASTM type: 301
  • ASTM UNS: S30100
  • Microstructure: Austenitic
Typical applications
  • Springs
  • Press plates
  • Conveyor chains
  • Mixer blades
  • Sinks
Typical chemical composition, by mass %
  • C: 0.10
  • Cr: 17.0
  • Ni: 7.0
  • Mo: -
  • N: -
  • Others : -

Core 301LN/4318

A low-carbon, nitrogen alloyed alternative to Core 301/4310 with elevated strength, making it particularly suitable for lightweight construction.

Please remove item from comparison before you can add another one

  • EN: 1.4318
  • ASTM type: 301LN
  • ASTM UNS: S30153
  • Microstructure: Austenitic
Typical applications

• Automotive applications, especially vehicles chassis
• Railroad cars

Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 17.7
  • Ni: 6.5
  • Mo: -
  • N: 0.14
  • Others : -

Core 201/4372

This low-nickel stainless steel has properties approaching Core 301/4310 but with a higher work hardening coefficient. Grade is available from Outokumpu Americas.

Please remove item from comparison before you can add another one

  • EN: 1.4372
  • ASTM type: 201
  • ASTM UNS: S20100
  • Microstructure: Austenitic
Typical applications
  • Household appliances
  • Kitchen utensils
  • Sinks
  • Doors and windows
  • Railroad cars
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 16.1
  • Ni: 3.6
  • Mo: -
  • N: 0.08
  • Others: 7Mn

Core 441/4509

A nickel-free 17% chromium ferritic stainless steel grade with good corrosion resistance and high-temperature strength was originally designed for exhaust systems. Core 441/4509 is available with single (niobium) or dual (niobium and titanium) stabilization. Due to good formability and weldability it is often a suitable replacement for Core 301/4310.

Please remove item from comparison before you can add another one

  • EN: 1.4509
  • ASTM type: -
  • ASTM UNS: S43940
  • Microstructure: Ferritic
Usage
  • Indoor claddings
  • Restaurant equipment and appliances
  • Tubes
  • Heat exchangers
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 17.6
  • Ni: -
  • Mo: -
  • N:

    -

     

  • Others: Nb, Ti 

Core 321/4541

A titanium-stabilized austenitic stainless steel with improved intergranular corrosion resistance for an extended temperature range.

Please remove item from comparison before you can add another one

  • EN: 1.4541
  • ASTM type: 321
  • ASTM UNS: S32100
  • Microstructure: Austenitic
Typical applications
  • Anneailing covers
  • Stack liners
  • Automotive exhaust systems
  • Welded pressure vessels
  • Flanges and valves
Typical chemical composotion, % by mass
  • C: 0.04
  • Cr: 17.3
  • Ni: 9.1
  • Mo: -
  • N: -
  • Others : Ti

Core 347/4550

Core 347/4550 is a niobium stabilized alternative to Core 321/4541 with improved intergranular corrosion resistance and good mechanical properties at high temperatures. Core 347/4550 is particularly useful in applications with intermittent heating in the range 400–900 °C/750–1650 °F.

Please remove item from comparison before you can add another one

  • EN: 1.4550
  • ASTM type: 347
  • ASTM UNS: S34700
  • Microstructure: Austenitic
Typical applications
  • High temperature gaskets
  • Rocket engine parts
  • Expansion joints
  • Aircraft collector rings
  • Exhaust manifolds
  • Chemical production equipment
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 17.5
  • Ni: 9.5
  • Mo: -
  • N: -
  • Others: Nb

Core 4622

A nickel-free, high-chromium (21Cr) ferritic stainless steel with equal corrosion resistance to Core 304/4301. Core 4622 has excellent deep drawability and is almost ridging free, meaning it is easier to polish and has a lower overall production cost.

Please remove item from comparison before you can add another one

  • EN: 1.4622
  • ASTM type: -
  • ASTM UNS: S44330
  • Microstructure: Ferritic
Typical applications
  • Household, catering and architectural applications (indoor and outdoor)
  • Tubular products for automotive and process industries
  • Building facades
  • Tanks and process equipment
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 21.0
  • Ni: -
  • Mo: -
  • N: -
  • Others: Nb,Ti,Cu

Supra 316/4401 stainless steel

Supra 316/4401 is a widely used Molybdenum alloyed austenitic stainless steel. It’s an all-purpose product with very good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Supra 316/4401 can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4401
  • ASTM type: 316
  • ASTM UNS: S31600
  • Microstructure: Austenitic
Typical applications
  • Heat exchangers
  • Flanges and valves
Chemical composition
  • C: 0.04
  • Cr: 17.2
  • Ni: 10.1
  • Mo: 2.1
  • N: -
  • Others : -

Supra 316L/4404 stainless steel

Supra 316L/4404 is a low-carbon alternative to Supra 316/4401. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion.Supra 316L/4404 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4404
  • ASTM type: 316L
  • ASTM UNS: S31603
  • Microstructure: Austenitic
Typical applications
  • Chemical industry
  • Petrochemical industry
  • Pulp and paper industry
  • Textile industry
  • Food and beverage industry
  • Pharmaceutical industry
  • Medical applications
  • Flanges and valves
Chemical composition
  • C: 0.02
  • Cr: 17.2
  • Ni: 10.1
  • Mo: 2.1
  • N: -
  • Others : -

Supra 316plus stainless steel

Supra 316plus is the highest strength stainless steel in the Supra range. It is a cost-efficient, 21Cr lower-nickel/molybdenum alternative to traditional molybdenum austenitics like Supra 316L. This product has good formability, excellent weldability, and is usable in cryogenic applications.

Please remove item from comparison before you can add another one

  • EN: 1.4420
  • ASTM type : -
  • ASTM UNS: S31655
  • Microstructure: Austenitic
Typical applications
  • Process and transport tanks
  • Water treatment and pipes
  • Heat exchangers
  • Architectural applications
Chemical composition
  • C: 0.02
  • Cr: 20.3
  • Ni: 8.6
  • Mo: 0.7
  • N: 0.19
  • Others : -

Supra 316L/4435 stainless steel

Supra 316L/4435 is a alternative to 316L/4404 with higher molybdenum and nickel content for enhanced corrosion resistance and formability.

Please remove item from comparison before you can add another one

  • EN: 1.4435
  • ASTM type: 316L
  • ASTM UNS: S31603
  • Microstructure: Austenitic
Typical applications
  • Urea plants
  • Pulp and synthetic fiber plants
  • Flanges and valves
  • Cryogenic
  • Hydrogen
Chemical composition
  • C: 0.02
  • Cr: 17.3
  • Ni: 12.6
  • Mo : 2.6
  • N: -
  • Others : -

Supra 316/4436 stainless steel

Supra 316/4436 is a product with high resistance to non-oxidizing acids and chloride-containing media due to higher molybdenum content. It has good formability and weldability.

Please remove item from comparison before you can add another one

  • EN: 1.4436
  • ASTM type: 316
  • ASTM UNS: S31600
  • Microstructure: Austenitic
Typical applications
  • Pulp and paper industry equipment
  • Pharmaceutical industry equipment
  • Flanges and valves
Chemical composition
  • C: 0.04
  • Cr: 16.9
  • Ni: 10.7
  • Mo: 2.6
  • N: -
  • Others: -

Supra 444/4521 stainless steel

Supra 444/4521 is a nickel-free molybdenum-alloyed ferritic stainless steel with very good corrosion resistance, good cold formability and high strength. It allows for thinner walls in tanks and is not prone to stress corrosion cracking.

Please remove item from comparison before you can add another one

  • EN: 1.4521
  • ASTM type: 444
  • ASTM UNS: S444000
  • Microstructure: Ferritic
Typical applications
  • Hot water tanks
  • Drinking water pipes
Chemical composition
  • C: 0.02
  • Cr: 18.0
  • Ni: -
  • Mo: 2.04
  • N: -
  • Others: Nb,Ti

Supra 316Ti/4571 stainless steel

Supra 316Ti/4571 is a titanium-stabilized alternative to Supra 316L/4404 – mainly used in Germany for elevated temperature applications. Due to its titanium-stabilization this product is weldable in all thickness ranges.

Please remove item from comparison before you can add another one

  • EN: 1.4571
  • ASTM type: 316Ti
  • ASTM UNS: S31635
  • Microstructure: Austenitic
Usage
  • Flue gas applications
  • Flanges and valves
Chemical composition
  • C: 0.04
  • Cr: 16.8
  • Ni: 10.9
  • Mo: 2.1
  • N: -
  • Others: Ti

Forta H400

Forta H400 has higher strength than standard 304/4301 and a lower nickel content, making it a cost-effective and lightweight austenitic product for the automotive industry. It has been used in automotive applications for over 10 years.

Please remove item from comparison before you can add another one

  • EN: 1.4376
  • ASTM type: -
  • ASTM UNS: -
  • Microstructure: Austenitic
Usage
  • Cross members
  • Strut domes
  • Bumpers
Typical chemical composition, % by mass
  • C: 0.04
  • Cr: 17.5
  • Ni: 4.0
  • Mo: -
  • N: 0.20
  • Others: 6.8Mn

Forta DX 2205

The most popular duplex product on the market. Offers very good resistance to uniform and localized corrosion and stress corrosion cracking in combination with high mechanical strength.

Please remove item from comparison before you can add another one

  • EN: 1.4462
  • ASTM type: -
  • ASTM UNS: S32205
  • Microstructure: Duplex
Typical applications
  • Cargo tanks in chemical tankers
  • Pulp and paper industry applications such as digesters and process tanks
  • Oil and gas industry applications such as flanges, tubes, and pipes
  • Structural components in bridges
  • Flanges and valves
Chemical composition, % by mass
  • C: 0.02
  • Cr: 22.4
  • Ni: 5.7
  • Mo: 3.1
  • N: 0.17
  • Others: -

Ultra 317L stainless steel

Ultra 317L is a molybdenum-alloyed austenitic stainless steel with higher corrosion resistance than Supra 316L/4404 – mainly used in the USA and Asia.

Please remove item from comparison before you can add another one

  • EN: 1.4438
  • ASTM type:

    317L

     

  • ASTM UNS: S31703
  • Microstructure : Austenitic
Typical applications
  • Chemical processing industry
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 18.2
  • Ni: 13.7
  • Mo: 3.1
  • N: -
  • Others : -

Ultra 4439 stainless steel

A molybdenum and nitrogen-alloyed austenitic stainless steel with significantly higher corrosion resistance than Supra 316L/4404. Also known as 317LMN.

Please remove item from comparison before you can add another one

  • EN: 1.4439
  • ASTM type: 317LMN
  • ASTM UNS: S31726
  • Microstructure: Austenitic
Typical applications
  • Chemical processing industry
  • Flue gas cleaning
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 17.3
  • Ni: 13.7
  • Mo: 4.1
  • N: 0.14
  • Others : -

Ultra 6XN stainless steel

Ultra 6XN is a 6 % molybdenum, high-nickel and nitrogen-alloyed austenitic product with extremely high resistance to both uniform and localized corrosion.

Please remove item from comparison before you can add another one

  • EN: 1.4529
  • ASTM type: -
  • ASTM UNS: N08926/N08367
  • Microstructure: Austenitic
Typical applications
  • Applications requiring resistance to chlorinated seawater
  • Flue gas cleaning
Typical chemical composition, % by mass
  • C: 0.01
  • Cr: 20.5
  • Ni: 24.8
  • Mo: 6.5
  • N: 0.20
  • Others: Cu

Ultra 904L stainless steel

Ultra 904L is a high-nickel and molybdenum austenitic stainless steel with very high corrosion resistance. It was originally developed for handling sulfuric acid at ambient temperatures, and is now used in a broad range of chemical industry applications.

Please remove item from comparison before you can add another one

  • EN: 1.4539
  • ASTM type: 904L
  • ASTM UNS: NO8904
  • Microstructure: Austenitic
Typical applications
  • Chemical and petrochemical industry equipment such as pipes, heat exchangers, tanks, and reactor vessels
  • Sulfuric acid handling
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.01
  • Cr: 19.8
  • Ni: 24.2
  • Mo: 4.3
  • N: -
  • Others: 1.4Cu

Ultra 254 SMO stainless steel

A 6 % molybdenum and nitrogen-alloyed austenitic stainless steel with extremely high resistance to both uniform and localized corrosion. This product was developed especially for oil and gas offshore platforms and the pulp and paper industry.

Please remove item from comparison before you can add another one

  • EN: 1.4547
  • ASTM type: -
  • ASTM UNS: S31254
  • Microstructure: Austenitic
Typical applications
  • Applications requiring resistance to chlorinated seawater
  • Flue gas cleaning
  • Maritime exhaust gas cleaning (EGC)
  • Bleaching equipment in the pulp and paper industry
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.01
  • Cr: 20.0
  • Ni: 18.0
  • Mo: 6.1
  • N: 0.20
  • Others: Cu

Ultra 4565 stainless steel

A 4.5% molybdenum, very high nitrogen alloyed austenitic stainless steel with excellent corrosion resistance and high mechanical strength.

Please remove item from comparison before you can add another one

  • EN: 1.4565
  • ASTM type: -
  • ASTM UNS: S34565
  • Microstructure: Austenitic
Typical applications
  • Flue gas desulfurization applications
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 24.0
  • Ni: 17.0
  • Mo: 4.5
  • N: 0.45
  • Others: 5.5Mn

Dura 420/4021

A very popular martensitic stainless steel that is corrosion resistant in water and steam. 

Please remove item from comparison before you can add another one

  • EN: 1.4021
  • ASTM type: 420
  • ASTM UNS: S42000
  • Microstructure: Martensitic
Typical applications
  • Cutting utensils
  • Surgical instruments
  • Press plates
  • Brake discs
  • Mechanical parts
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.20
  • Cr: 13.0
  • Ni: -
  • Mo: -
  • N: -
  • Others: -

Dura 17-7PH

A precipitation hardening stainless steel with high strength and hardness, good corrosion resistance, and satisfactory formability (depending on heat treatment/condition). 

Please remove item from comparison before you can add another one

  • EN: 1.4568
  • ASTM: 631
  • UNS: S17700
  • Microstructure: Precipitation hardening
Typical applications
  • Retaining rings
  • Springs
  • Valves and flanges
  • Gears
  • Aircraft parts
Typical chemical composition, % by mass
  • C: 0.08
  • Cr: 17.0
  • Ni: 7.0
  • Mo: -
  • N: -
  • Others : Al

Therma 153 MA stainless steel

Therma 153 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. This product has an excellent resistance to embrittlement.

Please remove item from comparison before you can add another one

  • EN: 1.4818
  • ASTM type: -
  • ASTM UNS: S30415
  • Microstructure: Austenitic
Typical applications
  • Recuperators
  • Conveyor belts
  • Expansion bellows
  • Power generation applications
  • Cyclone dip tubes
  • Bell furnaces
  • Muffle furnaces
  • Automotive components
  • Tube shields
  • Heat treatment trays
  • Dampers
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 18.5
  • Ni: 9.1
  • Mo: -
  • N: 0.15
  • Others : Si,Ce

Therma 4828 stainless steel

Therma 4828 is an austenitic heat resisting stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation atbetween 600–850°C/1110– 1560 °F.

Please remove item from comparison before you can add another one

  • EN: 1.4828
  • ASTM type: -
  • ASTM UNS: -
  • Microstructure: Austenitic
Typical applcations
  • Furnace equipment (especially supporting parts)
  • Annealing and hardening boxes
  • Air heaters
  • Exhaust systems
  • Automotive components such as turbochargers
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 19.3
  • Ni: 11.2
  • Mo: -
  • N: -
  • Others: Si

Therma 253 MA stainless steel

Therma 253 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1150°C/2100°F. There is a slight susceptibility to embrittlement during continuous operation between 600–850°C/1110–1560°F.

Please remove item from comparison before you can add another one

  • EN: 1.4835
  • ASTM type: -
  • ASTM UNS: S30815
  • Microstructure: Austenitic
Typical applications
  • Oil industry equipment
  • Conveyor belts
  • Refractory anchors
  • Expansion bellows
  • Radiant tubes
  • Rotary kilns
  • Exhaust manifolds
  • Power generation applications
  • Cyclone dip tubes
  • Impact separators
  • Bell furnaces
  • Muffle furnaces
  • Automotive exhaust components
  • Tube shields
  • Heat treatment trays
  • Dampers
  • Recuperator tubes
  • Large-scale bakery ovens
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.09
  • Cr: 21.0
  • Ni: 11.0
  • Mo: -
  • N: 0.17
  • Others: Si, Ce

Therma 314/4841 stainless steel

Therma 314/4841 is an austenitic heat resisting stainless steel with excellent oxidation resistance in temperatures up to 1150°C/2100°F. There is a high susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F

Please remove item from comparison before you can add another one

  • EN: 1.4841
  • ASTM type: 314
  • ASTM UNS: S31400
  • Microstructure: Austenitic
Typical applications
  • Furnace equipment
  • Superheater suspensions
  • Enameling grates and hardening boxes
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.06
  • Cr: 24.3
  • Ni: 19.2
  • Mo: -
  • N: -
  • Others: Si

Therma 310S/4845 stainless steel

Therma 310S/4845 is an austenitic product with very good oxidation resistance in general and good oxidation resistance in mildly cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. There is a slight susceptibility to embrittlement during continuous operation between 600–900°C/1110–1652°F.

Please remove item from comparison before you can add another one

  • EN: 1.4845
  • ASTM type: 310S
  • ASTM UNS: S31008
  • Microstructure : Austenitic
Typical applications
  • Furnace equipment
  • Oil industry equipment
  • Heat treatment baskets
  • Heat exchangers
  • Steam boilers
  • Thermowells
  • Automotive components
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 25.5
  • Ni: 19.1
  • Mo: -
  • N: -
  • Others : -

Therma 321H/4878 stainless steel

Therma 321H/4878 is an austenitic heat resisting stainless steel with comparable wet corrosion resistance to Core 321/4541 that is best employed in temperatures up to 850 °C/1560 °F.

Please remove item from comparison before you can add another one

  • EN: 1.4878
  • ASTM type: 321H
  • ASTM UNS: -
  • Microstructure: Austenitic
Typical applications
  • Furnace equipment
  • Case hardening boxes
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 17.3
  • Ni: 9.1
  • Mo: -
  • N: -
  • Others: Ti 

Buying precision strip?

Read our five most important considerations when purchasing precision strip.

Precision strip also availble in Circle Green

Precision strip can also be purchased as Outokumpu Circle Green®, our biggest achievement in sustainability to date.

Why Precision Strip?

  • Machined edges and severely restricted grain sizes available
  • Remelt form available for particularly high cleanliness requirements
  • Specified low or elevated yield or tensile strength
  • Embossing for customized brand value.
  • Multi-Ring available in endless strip for smooth production
  • Targeting of special properties to specific applications, including yield strength, tensile strength, grain size, and isotropy.

Attributes

  • The most common grades are austenitic and ferritic.
  • Martensitic and Dura (also known as Ultrafort) as well as duplex grades are available on request.
  • Widths ranging from 3 mm to less than 650 mm
  • Thicknesses ranging from 0.05 mm to 1.5 mm

Passionate about precision — promising the strictest of tolerances

We offer precision strips ranging from 3 to 650 mm in width and 0.05 to 1.5 mm in thickness that adhere to remarkably tight tolerances — in every parameter ranging from tension strength and thickness to flatness and surface structure.

 

Tailormade thin strips engineered to meet your needs

Outokumpu’s precision strips are an ideal choice for demanding applications in the medical, automotive, energy, and household electronics sectors.

Each of our precision strips is meticulously crafted to order. We offer a diverse range of 30 to 40 different grades, with a focus on delivering individualized solutions that align seamlessly with each industry’s distinct needs. The special properties of precision strips can be targeted to specific applications, including yield strength, tensile strength, grain size, and even isotropy.

Outokumpu stainless steel production unit Dahlerbrück in Schalksmühle, Germany, offers high-performance stainless precision strip.

Our range meets rigorous formability and usage criteria, including high corrosion resistance in sectors like oil and gas, material purity for medical applications demand, and ultra-thin strips for fuel cell production.

 

Delivering precision across a comprehensive selection of grades

Outokumpu has the largest stainless steel portfolio in the market — we can deliver precision strips in any grade of stainless steel. Our wide range includes common grades such as austenitic and ferritic, apart from specialized grades that include martensitic precipitation-hardening (PH) stainless steel Dura 6908 (Ultrafort 1.6908), and Duplex grades upon request.

Outokumpu stainless steel precision strip is available with embossed surfaces, deburred edges, fully rounded edges, spooled material, endless strip, and galvanized.

 

Would you like to know more?

Contact us